Hot Rubberized Crack Seal

We use a high spec hot rubberized crack seal. It is melted in our melter box and applied directly into the crack for a waterproof seal.

Crack Sealing Steps:

1. Clean the cracks with wire brushes to ensure all sand weeds and debris are removed.

2. Use a backpack blower to blow out any sand.

3. Using a pour pot, we take crack seal right from the melter box and apply into the cracks.

4. Then using a squeegee we smooth off and even out the rubber.

Crack seal information:

1. Not all cracks are eligible for crack seal.

2. Crack seal will have some settling and depending on the severity and depth of the crack will not be completely flush with asphalt. However, it will still have a watertight seal to protect from water penetration.

3. Crack seal requires maintenance and upkeep it is not a permit solution.

4. Cracks are recommended to be assessed before and after winter months to ensure they are sealed off to protect your asphalt investment from further problems.